Built to maximize a chop saw's potential:
1 847 623-7029
Easily mounts to any machine using our 1-5/8" x 1-5/8" x 60" strut rail
If you need your stops to travel a long distance then take a look at our EZ Speedy Extension!
When you don't need the length, the extension easily lifts off the support stand and can quickly be stowed out of the way of a shop's valuable floor space.
All the adjustment points of the support stand are tool-less just like the Flip Stop. Rollers can be added with or without quick handles.
EZ Speedy Fence System 5LR - DeWALT (Original system)
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes one EZ Speedy Fence, one EZ Speedy Flip-Stop and one EZ Speedy Fence Table or two Roller Assemblies.
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
This patented design is meant for the professional tradesman, the hobbyist, and everyone in between. If you are an operator that would like the precision of a machinist’s stop with the flexibility of an open material table, this is the product for you.
This is a heavy duty stop engineered for use with unistrut or similar strut system with 1 5/8" X 1 5/8" with 7/8" channel opening. We suggest using B22 strut channel from Cooper, but we've found that other manufacturers offer this size of strut channel as well, including...
Flex Strut FS200
Superstrut from Home Depot
The image to the right shows one Flip-Away newly installed on an existing strut rail. Other cutting stations needed custom machining in order to accommodate existing rails, but we were able to machine other Flip-Aways to fit their rail.
- Patented design allows for precise adjustments with the turn of a hex bolt: one hex face (1/6 of a turn) = ~.010 inch
- The main body, stop plate, and flip away arm are all American-made to exceed the robust demands of commercial manufacturing
- NEW: Clear plating to protect and preserve!
- The design is over-engineered in order to remain a superior product for years
- The plate and the adjustment bolt are supported by spring-loaded shoulder bolts: these help to accommodate for backlash when adjusting in the anticlockwise direction
- The flip-away arm has a machined space, meant to accommodate a stick-on rail scale or tape measure
Multiple Stops, but All Can Go
The Flip-Away is a Jack-of-all-trades without being a master of none: adaptability with accuracy, versatility with precision, repeat-ability with flexibility. The flexibility comes from the fact that the Flip-Away lets operators set a stop and walk away without tying up an entire machine. Simply set your coordinate, do your cutting and then flip the stop up and away when you leave. As long as nobody moves your stop (a tape mark helps) you can come back hours or days later with little or no time spent reacquiring your stop: it is already there! You can have multiple stops set, without stopping anyone from cutting.
the Flip-Away can be used on either side of your saw. If you look closely at the video, you'll see that we have no less than 10 (and sometimes more) stops in the two 10ft. (right and left) rail segments.
Something we've noticed about the Flip-Away from our use in the shop: since the stop can flip out of the way after clamping, our stop can prevent blade binding...If you clamp the [material] and then flip the stop...you stop stressing your blade....Then, when you are done with a cut, [remove the cut material], flip the Flip-Away back down, and get ready to cut again. In the long term, this [stop] has saved us time, material, and blades.