Perfect for your table saw, router table, drill press, milling machine, and anywhere you need a Micro Adjustable Work Stop
Use Our Table Saw Micro Adjuster on the Saw Stop Brand
If you own a Saw Stop brand Table Saw, you will have no need for the magnifying glasses on either side of the saw fence. When you measure a nick in your material you will be able to confidently bring the fence into size by dialing the hex knob in or out.
3 flats = 1/32"
6 flats = 1/16"
Experienced operators use both sides of their Biesemeyer fence T-square; the Micro-Adjuster is ambidextrous.
end-users can employ two or more Micro-Adjusters to allow for multiple precise cutting coordinates with minimal adjustment time.
Problem and Solution:
We often find that we need to bring our material gradually in to size. Sometimes this material is expensive, so we can't afford to make mistakes.
When we need to trim in terms of thousandths of an inch, this system has made cutting much more efficient: fewer man-hours spent with less material wasted.
In our experience, our Micro-Adjuster is the best and most practical mechanically calibrated fence adjuster currently on the market.
Table Saw Fence Micro-Adjuster
Made in the USA
Lead time 1 week
Dial out your Fuzz!!!
Move the adjustment point one flat and you can move your fence 0.010"
Clamp opening = 3/4" thru 2"
This Micro-Adjuster is specifically engineered for commercial Biesemeyer-style T-square table saw fences, but it can be used for router tables and other adjusting jobs. This added accessory allows operators to dial in their cutting coordinate, allowing for precise adjustments. Though other designs and other products are available, we haven't encountered another adjuster as practical as ours which can still stand up to the rigors of an industrial/commercial environment, as well as afford an operator such consistently accurate control.
Buy multiple and time!
Multiple Micro-Adjuster will save you time by not having to break setups
EZ Speedy Fence System 5LR - DeWALT (Original system)
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes one Flip-Away Strut Stop & one EZ Speedy Fence.
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
3" Diameter x 5-1/2" Deep Cut Bi-Metal Hole Saw
1 847 623-7029
Lead Time 1 week
Extreme Angle, Extra Deep Hole Saw
5 1/2" Deep Cut Bi-Metal Hole Saw
3/4-16 Thread Pitch
Micro-Adjustable Flip-Away Strut Stop
Made in USA
Lead time 1 week
- Can be assembled into a left or right side
- American-made design to exceed demands of commercial manufacturing
- Clear Zinc Plating finish for corrosion resistance
- Flip-Away action and quick-set clamping for speed
- Precise indexing for accuracy
- Anti-lash spring-loaded shoulder bolts accommodate for backlash
- 1 Flat (1/6 of a turn) of the gold bolt equates to ~.010 inch
- Reliably get your adjustments down to .005" (Half a Flat)
- One full turn = 1/16"
Buy multiple and save time!
Multiple Flip-Aways will save you time by not having to break setups. Set multiple stops to different dimensions you will be required to cut.
The design (Patent # U.S. 9,545,734 B2)
is machined from one-piece billet aluminum, with the moving parts made from stainless steel and black oxide. The T-handle and adjustment knob, also of billet aluminum, give the user an ergonomic and solid grip on the task at hand, with the wear resistance of 1018 billet steel used for the pressure plate. These materials give the Micro-Adjuster strength without adding unnecessary weight, and will provide years of robustness.
We are proud to say that all of our material--with the possible exception of the set screws--as well as our machining and assembly is produced and made in America. It has been engineered to meet and exceed the demands of commercial use. Though other designs are available, we haven't encountered another adjuster as practical as ours which can still stand up to the rigors of an industrial/commercial environment, as well as afford an operator such consistently accurate control.