Roller Assembly (Original System)
Only a few left!
847-623-7029
Made in the USA
This is a single spinning roller, the same one from the EZ Speedy Fence. 6-7/16" Long Roller surface.
Purchasing this Roller will allow you to customize how many Rollers you have on your T-track Fence
Mounts to the bottom of the Rails in the EZ Speedy Fence, Extension, and Flip-Away Strut Stop.
Average Lead Time 1 week
Micro-Adjustable Flip-Away Strut Stop
847-623-7029
Made in USA
Lead time 1 week
Tool less operation is now STANDARD! Each Flip-Away Strut Stop comes with a quick handle, so now the allen wrench is no longer needed!
Product details:
- Can be assembled into a left or right side
- American-made design to exceed demands of commercial manufacturing
- Clear Zinc Plating finish for corrosion resistance
- Flip-Away action and quick-set clamping for speed
- Precise indexing for accuracy
- Anti-lash spring-loaded shoulder bolts accommodate for backlash
- 1 Flat (1/6 of a turn) of the gold bolt equates to ~.010 inch
- Reliably get your adjustments down to .005" (Half a Flat)
- One full turn = 1/16"
Buy multiple and save time!
Multiple Flip-Aways will save you time by not having to break setups. Set multiple stops to different dimensions you will be required to cut.
EZ Speedy Fence - DeWalt 5LR (NEW & IMPROVED)
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- Tool-less Upgrade (EZ Speedy Quick Handles for the Strut Mount)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel Double T-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
- Table
EZ Speedy Fence - Bosch 5LR (NEW & IMPROVED)
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the Bosch Gravity Rise T4B Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the Bosch stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel DoubleT-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
- EZ Speedy Quick Handles for Fence Mounts
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
- Table
EZ Speedy Extension (NEW & IMPROVED)
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
For anyone cutting long material with our EZ Speedy Fence this EZ Speedy Extension adds an additional 5 FT of material support. Purchase two and now you can support and additional 10 FT. Use for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Standard Equipment:
- Tool-less Upgrade (EZ Speedy Quick Handles for the Mending Plate and one T-Knob for the Support Stand)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel DoubleT-Track
- Support Stand
- Mending Plate with Clamps (to attach to the EZ Speedy Fence or another Extension)
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
- Table
Roller Curb
Worried about your material falling off the rollers? Maybe you've positioned your EZ Speedy Fence System on a hill and you want to prevent you material from sliding off the roller. Well that's why we created the Roller Curb!
Simply pull the plastic cap off your existing roller, and insert the Roller Curb. Tighten the center bolt to clamp to the inside of the roller and your ready to go!
*Roller NOT included - comes as pictured (Image 1-2)*