FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter EZ-Speedy Zero Clearance Left and Right Fence

SKU:
$161.00
136 161 $136.00 - $141.00
$141.00
On Sale
Unavailable
per item
(DOES NOT INCLUDE MITER SAW)
Purchase 2 or more product lower shipping cost
NEW DESIGN 2 week lead time
Exact fit for the FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter
​​If you are looking to increase the safety and precision of your cuts then our Zero Clearance Fence is the perfect product for you. No more small pieces jamming into your standard fence and binding your blade. 
  • Full Machined all Edges
  • Increase product cutting support.
  • Reduce chipping.
  • Reduce kickback.
  • Reduced blade binding cutting small parts.
  • Made from lightweight stable heat treated 6061-T6 Plate.
  • Vinyl Protective film cover.
We also put a relief cut on the inside edges of the aluminum fence. This will allow you to change the angle of your saw while still being able to accurately hook your tape measure onto the fence edge. Enabling you to set up a miter cut as quickly and accurately as a 90-degree cut.
The two aluminum fence pieces come shipped with flat head bolts + flange nuts.
For greater accuracy, efficiency and safety, we recommend pairing our Zero Clearance Fence with our Zero Clearance Table Insert.


*Please note these fences were engineered to allow for zero clearance material support at the highest vertical cutting capacity which is achieved in what is commonly referred to as "Chop Mode”, therefore you cannot operate this specific saw in the slide mode without hitting the fences. If you desire the ability to use in the slide mode, you just slide the fences out of the way so that you don't hit, or you can select a notched version below which will have the clearances needed to use your saw in the slide mode. If you have any questions or concerns, please don't hesitate to contact us! *

On Sale

On Sale

FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter Zero Clearance Table Insert

$40.00 $30.00

Purchase 2 or more lower shipping cost

Buy 3 and get 1 Free you save 25%

The 4 one will be added to your shipment, but will not show up in your cart

Exact fit for the FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter

Made from High Density Polyethylene. Which makes it easy to make the initial cut and durable for daily commercial use.

  • Machined out of solid Density Polyethylene Sheet
  • Increase product cutting support.
  • Reduce chipping
  • Reduce kickback
  • Reduced blade binding cutting small parts.
  • Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.

For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence. 
Shop

On Sale

On Sale

EZ-SPEEDY ZERO CLEARANCE TABLE INSERT REPLACEMENT HARDWARE HOLD DOWN SCREWS for FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter Saw

$15.00 $10.00

1 847 623-7029

Lead Time 1 week

EZ-SPEEDY ZERO CLEARANCE TABLE INSERT REPLACEMENT HARDWARE HOLD DOWN SCREWS for FLEX 24V Brushless Cordless 12-Inch Dual Bevel Sliding Miter Saw
Shop

On Sale

On Sale

EZ Speedy Flip-Stop with Calibrated micro position Dial

$150.00 $100.00

Purchase 2 or more save on shipping

Buy 4 Get 1 Free

847-623-7029

Made in USA

Increase your productivity with the redesigned EZ Speedy Flip Stop! Engineered for those craftsmen who wish to take their material cutting to the next level of tolerance and accuracy. Each line on the dial is calibrated to adjust cuts +/- 0.0052". Featuring an adjustable aluminum quick handle, which can be positioned so that it doesn't interfere with anything while in use. Simply lift and reposition.

Product details: 

  • Can be assembled into a left or right side - flush with table, low, or high positioning.
  • American-made design to exceed demands of commercial manufacturing
  • Clear Zinc Plating finish for corrosion resistance
  • Stop Plate Dimension 1/4" thick 2-3/4" wide 2-5/8" tall
  • Flip-Away action and quick-set clamping for speed
  • Multi position black powder coat aluminum locking handle.
  • Precise indexing for accuracy
  • 1 line (1/12 of a turn) equates to 0.0052"
  • Easy, repeatability with your cuts
  • One full turn = 1/16"

Purchasing one means you will receive a quantity of one!

Buy multiple and save time!

Multiple Flip-Stops will save you time by not having to break setups. Set multiple stops to different dimensions you will be required to cut.
Shop
Contact Us
847-623-7029
[email protected]
ORDER PROCESSING POLICY:  You will receive an "order confirmation" email notification with your order number from "[email protected]" 
but depending on your email settings, these emails may end up in the spam or junk folders. Please check your spam and junk folders if you haven't received any correspondence from us. If you have questions or concerns about the order you have placed, you can call or email us. Please have your order number ready if you contact us with any questions regarding your order. 

Do to heavy demand at this time our processing time can take up to 1 to 2 weeks.
 We appreciate your patience.
If you've purchased expedited shipping please give us a call or email us after you place your order.
​​ORDER CANCELATION POLICY:(Items in stock)
If for whatever reason you wish to cancel your order with us, you will need to call or email us immediately. Any CANCELATION of an order will have a 5% transaction fee. We can’t cancel an order that has already shipped. If you are wishing to cancel an order that has already shipped, contact us and explain. It is still possible to cancel the order, but the refund we provide may only be for the product cost, not for the shipping cost and will depend on a case by case basis. 
​ORDER CANCELATION POLICY:(Custom Items)
If for whatever reason you wish to cancel your order with us, you will need to call or email us immediately. A cancelation fee of 30% may be applied to any refund for canceled orders.

    Enter your Email for Sales, New Products, Shop Secrets and News
SHIPPING POLICY:
​***All Orders Are Shipped With Signature Required***
To combat the occasional porch thief and lost packages, we've elected to only send out our product with signature required shipping, so please plan for this. We apologize for any inconvenience. ​If you've elected to waive the signature required, please let us know in the "Order Notes" before you place your order. By waiving the signature required, you have accepted the liability of safe delivery of your package.
You will receive a shipping notification with your package tracking number, but depending on your email settings, sometimes our emails end up in the spam or junk folders. Please check your spam and junk folders if you haven't received any correspondence from us.
Only USPS postage can be shipped to a PO BOX.
​RETURN POLICY: Any possible returns will be considered on a case-by-case basis. If a return is approved, all shipping charges will be at the buyer's expense, and may be subject to a restocking fee (Up to 20% of item cost). We do not refund shipping costs sorry. In order for returns to be considered, the seller must be notified immediately, and the item must be returned in original condition (no modifications or damage). Furthermore, any returns must be shipped and in transit to our location within three business days of the original delivery.

    International Customers Please fill out this form to begin your order, if your country is not listed,
    ​United Kingdom, Canada, Australia, Ireland, New Zealand, Norway, Denmark, Finland, Sweden and France.

    To get the most accurate pricing for you, one of our sales folks will reach out to you as soon as possible and send you an email with an invoice that can be paid online with a credit card. Note there is a $50 minimum order.
Copyright © 2023