Milwaukee M18 FUEL™ 7-1/4” 2733-20, 2733-21 Zero Clearance Table Insert
Purchase 2 or more lower shipping cost
Exact fit for the Milwaukee 7-1/4" Model # 2733-20, 2733-21
Made from High Density Polyethylene. Which makes it easy to make the initial cut and durable for daily commercial use.
- Increase product cutting support.
- Reduce chipping
- Reduce kickback
- Reduced blade binding cutting small parts.
- Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.
For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence.
Milwaukee 7-1/4" 2733-20, 2733-21 Zero Clearance Left and Right Fence
Only a few left!
Purchase 2 or more product lower shipping cost
Exact fit for the Milwaukee Model # 2733-20, 2733-21
If you are looking to increase the safety and precision of your cuts then our Zero Clearance Fence is the perfect product for you. No more small pieces jamming into your standard fence and binding your blade.
- Increase product cutting support.
- Reduce chipping.
- Reduce kickback.
- Reduced blade binding cutting small parts.
- Made from lightweight stable heat treated 6061-T6 Plate.
- Vinyl Protective Film Cover.
We also put a relief cut on the inside edges of the aluminum fence. This will allow you to change the angle of your saw while still being able to accurately hook your tape measure onto the fence edge. Enabling you to setup a miter cut as quickly and accurately as a 90-degree cut.
The two aluminum fence pieces come shipped with flat head bolts + flange nuts.
For greater accuracy, efficiency and safety, we recommend pairing our Zero Clearance Fence with our Zero Clearance Table Insert.
*Please note these fences were engineered to allow for zero clearance material support at the highest vertical cutting capacity which is achieved in what is commonly referred to as "Chop Mode”, therefore you cannot operate this specific saw in the slide mode without hitting the fences. If you desire the ability to use in the slide mode, you just slide the fences out of the way so that you don't hit, or you can select a notched version below which will have the clearances needed to use your saw in the slide mode. If you have any questions or concerns, please don't hesitate to contact us! *
EZ Speedy Axle Kit
1 847 623-7029
Lead Time 1 week
Introducing the EZ Speedy Axle Kit.
This axle kit mounts directly onto your DeWalt DW723, DWX723, and DWX724 miter saw stand.
Note the DeWalt DW723 Axle Kit does not come with spacer!
Make sure that you check your model number.
- Increase the mobility of your saw station.
- Leave your saw on the stand, drop the wheels to the ground, and then roll. No more lifting your saw around the job site or shop
- Save your back!
- For save operation of Axle Kit, you must maintain proper tire air pressure.
Comes with all necessary hardware to bolt the axle to the stand and tires to the axle.
Includes a template that you can tape to your saw stand to align the axle before drilling. See our Youtube Video by scrolling below.
If you order the Axle Kit with tires, we will Ship your Kit with tires . However if you decide to order without tires we've attached the link below.
EZ Speedy Fence - DeWalt 5'LEFT or RIGHT (NEW & IMPROVED)
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
Lead Time (Made to order upon request)
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- Tool-less Upgrade (EZ Speedy Quick Handles for the Strut Mount)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel Double T-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
Optional Additions:
- EZ-Speedy Flip-Stop
- Rollers
- Table
- COMING SOON!!!Crown Stop early 2022
- Coping Crown Clamp early 2022
- Vertical and Horizontal workpiece clamping for miter saws
EZ Speedy Low Extension
Only a few left!
EZ Speedy Low - NEW FEATURES - NEW IMPROVEMENTS
For anyone cutting long material with our EZ Speedy Fence this EZ Speedy Extension adds an additional 5 FT of material support. Purchase two and now you can support and additional 10 FT. Use for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Standard Equipment:
- Tool-less Upgrade (EZ Speedy Quick Handles for the Mending Plate and one T-Knob for the Support Stand)
- 5 FT Long, 1-5/8" x 13/16" Steel T-Track
- Support Stand
- Mending Plate with Clamps (to attach to the EZ Speedy Fence or another Extension)
Optional Additions:
- EZ Speedy Flip-Stop w? Calibrated Dial
- Rollers
- Table
Table Saw Fence Micro-Adjuster
Purchase 2 or more save on shipping
Made in the USA
Lead time 1 week
BUY 2 AND GET THE SECOND 1 HALF OFF
Dial out your Fuzz!!!
Move the adjustment point one flat and you can move your fence 0.010"
Clamp opening = 3/4" thru 2"
This Micro-Adjuster is specifically engineered for commercial Biesemeyer-style T-square table saw fences, but it can be used for router tables and other adjusting jobs. This added accessory allows operators to dial in their cutting coordinate, allowing for precise adjustments. Though other designs and other products are available, we haven't encountered another adjuster as practical as ours which can still stand up to the rigors of an industrial/commercial environment, as well as afford an operator such consistently accurate control.
Buy multiple and time!
Multiple Micro-Adjuster will save you time by not having to break setups
EZ Speedy Dual Clip
Lead Time 1 week
1 847 623-7029
We've re-invented the average clipboard! The EZ Speedy Dual Clip!
This clipboard design was born out of necessity to have a clipboard that fits into the t-track on our mobile miter saw base. We took it one step further and created a clipboard that has two different geometrically bent ends. One for inserting and one for hooking. The Dual Clip also has two clips so you can utilize both sides.
Hooks to anything and the opposite side allows you to insert into our EZ Speedy Fence System or any type of strut rail system. You can even set your tablet down on the dual clip. It can even work like a sturdy writing surface. Carry with you from jobsite to jobsite.
See our product video below!