DeWalt 7-1/4" DCS361M1 EZ-Speedy Zero Clearance Left and Right Fence

SKU:
$168.00
138 168 $138.00
$138.00
On Sale
Unavailable
per item

Purchase 2 or more product lower shipping cost

Exact fit for the DeWalt 7-1/4" Model # DCS361M1

If you are looking to increase the safety and precision of your cuts then our Zero Clearance Fence is the perfect product for you. No more small pieces jamming into your standard fence and binding your blade. 

  • Increase product cutting support.
  • Reduce chipping.
  • Reduce kickback.
  • Reduced blade binding cutting small parts.
  • Made from lightweight stable heat treated 6061-T6 Plate.
  • Vinyl Protective Film Cover.

Right Fence has been machined for clearance of motor housing when cutting right 45-degree miters.

We also put a relief cut on the inside edges of the aluminum fence. This will allow you to change the angle of your saw while still being able to accurately hook your tape measure onto the fence edge. Enabling you to set up a miter cut as quickly and accurately as a 90-degree cut.

The two aluminum fence pieces come shipped with flat head bolts + flange nuts.

For greater accuracy, efficiency and safety, we recommend pairing our Zero Clearance Fence with our Zero Clearance Table Insert.


*Please note these fences were engineered to allow for zero clearance material support at the highest vertical cutting capacity which is achieved in what is commonly referred to as "Chop Mode”, therefore you cannot operate this specific saw in the slide mode without hitting the fences. If you desire the ability to use in the slide mode, you just slide the fences out of the way so that you don't hit, or you can select a notched version below which will have the clearances needed to use your saw in the slide mode. If you have any questions or concerns, please don't hesitate to contact us! *

On Sale

On Sale

DeWalt 7-1/4" DCS361M1 Zero Clearance Table Insert

$30.00 $20.00

Purchase 2 or more lower shipping cost

Buy 3 and get 1 Free you save 25%

​Exact fit for the DeWalt 7-1/4" Model # DCS361M1

Made from High Density Polyethylene. Which makes it easy to make the initial cut and durable for daily commercial use.  

  • Machined out of solid Density Polyethylene Sheet
  • Increase product cutting support.
  • Reduce chipping
  • Reduce kickback
  • Reduced blade binding cutting small parts.
  • Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.

For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence.  
Shop

On Sale

On Sale

EZ Speedy Dual Clip

$54.99 $40.00

Lead Time 1 week

1 847 623-7029


We've re-invented the average clipboard! The EZ Speedy Dual Clip!


This clipboard design was born out of necessity to have a clipboard that fits into the t-track on our mobile miter saw base. We took it one step further and created a clipboard that has two different geometrically bent ends. One for inserting and one for hooking. The Dual Clip also has two clips so you can utilize both sides.


Hooks to anything and the opposite side allows you to insert into our EZ Speedy Fence System or any type of strut rail system. You can even set your tablet down on the dual clip. It can even work like a sturdy writing surface. Carry with you from jobsite to jobsite.


See our product video below!
Shop

On Sale

On Sale

EZ Speedy Axle Kit

$120.00 - $140.00

1 847 623-7029

Lead Time 1 week

Introducing the EZ Speedy Axle Kit.

​This axle kit mounts directly onto your DeWalt DW723, DWX723, and DWX724 miter saw stand.

Note the DeWalt DW723 Axle Kit does not come with spacer!

Make sure that you check your model number.

Increase the mobility of your saw station.

  • Leave your saw on the stand, drop the wheels to the ground, and then roll. No more lifting your saw around the job site or shop
  • Save your back!
  • For safe operation of Axle Kit, you must maintain proper tire air pressure.
  • New Chrome Plating for lifetime finish

Comes with all necessary hardware to bolt the axle to the stand and tires to the axle.

Includes a template that you can tape to your saw stand to align the axle before drilling. ​See our Youtube Video by scrolling below.

​If you order the Axle Kit with tires, we will Ship your Kit with tires .

​
Shop

On Sale

On Sale

EZ Speedy Kickstand Kit

$225.00 $155.00

1 847 623-7029

Lead Time 1 week


NOW WITH STANDARD TOOL LESS OPERATION!

EZ Speedy Kickstand KIT comes as pictured. Axle not included and is available in a separate listing below. Our kickstand mounts onto our EZ Speedy Axle Kit for the DeWalt DW723, DWX723, and DWX724 miter saw stands.

Allows the saw stand to be positioned vertically while the saw is still attached for a reduced footprint.

Rotates out of the way when not in use.

Comes with all necessary hardware to install the kickstand onto the axle. (3/16 Allen Wrench Needed to Install Cross Bar)

  • New Chrome Plating for lifetime finish
Shop
Contact Us
847-623-7029
[email protected]
ORDER PROCESSING POLICY:  You will receive an "order confirmation" email notification with your order number from "[email protected]" 
but depending on your email settings, these emails may end up in the spam or junk folders. Please check your spam and junk folders if you haven't received any correspondence from us. If you have questions or concerns about the order you have placed, you can call or email us. Please have your order number ready if you contact us with any questions regarding your order. 

Do to heavy demand at this time our processing time can take up to 1 to 2 weeks.
 We appreciate your patience.
If you've purchased expedited shipping please give us a call or email us after you place your order.
​​ORDER CANCELATION POLICY:(Items in stock)
If for whatever reason you wish to cancel your order with us, you will need to call or email us immediately. Any CANCELATION of a order will have a 5% transaction fee. We can’t cancel an order that has already shipped. If you are wishing to cancel an order that has already shipped, contact us and explain. It is still possible to cancel the order, but the refund we provide may only be for the product cost, not for the shipping cost and will depend on a case by case basis. 
​ORDER CANCELATION POLICY:(Custom Items)
If for whatever reason you wish to cancel your order with us, you will need to call or email us immediately. A cancelation fee of 30% may be applied to any refund for canceled orders.

    Enter your Email for Sales, New Products, Shop Secrets and News
SHIPPING POLICY:
​***All Orders Are Shipped With Signature Required***
To combat the occasional porch thief and lost packages, we've elected to only send out our product with signature required shipping, so please plan for this. We apologize for any inconvenience. ​If you've elected to waive the signature required, please let us know in the "Order Notes" before you place your order. By waiving the signature required, you have accepted the liability of safe delivery of your package.
You will receive a shipping notification with your package tracking number, but depending on your email settings, sometimes our emails end up in the spam or junk folders. Please check your spam and junk folders if you haven't received any correspondence from us.
Only USPS postage can be shipped to a PO BOX.
​RETURN POLICY: Any possible returns will be considered on a case-by-case basis. If a return is approved, all shipping charges will be at the buyer's expense, and may be subject to a restocking fee (Up to 20% of item cost). In order for returns to be considered, the seller must be notified immediately, and the item must be returned in original condition (no modifications or damage). Furthermore, any returns must be shipped and in transit to our location within three business days of the original delivery.

    International Customers Please fill out this form to begin your order, if your country is not listed,
    ​United Kingdom, Canada, Australia, Ireland, New Zealand, Norway, Denmark, Finland, Sweden and France.

    To get the most accurate pricing for you, one of our sales folks will reach out to you as soon as possible and send you an email with an invoice that can be paid online with a credit card. Note there is a $50 minimum order.
Copyright © 2023