- Product Store
- >
- EZ Speedy Fence System
- >
- EZ Speedy New Low Support Fence System 5' - DEWALT LEFT or RIGHT
EZ Speedy New Low Support Fence System 5' - DEWALT LEFT or RIGHT
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes only (1) Side
What you get is (1) EZ Speedy Flip-Stop , (1) EZ Speedy T-Track, (1) EZ-Speedy Table (2) EZ Speedy Low Coupler Mount Assemblies and (1) Pair of EZ Speedy Fence Mount with Multi position black aluminum locking handles.
With 5 FT of material support, each EZ Speedy Low Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, cold saw, miter saw, radial arm saw, punch press and band saw.
This support fence system and flip stop is for the DW723, DWX723, and DWX724 DEWALT Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent EZ Speedy Mounts.
The EZ Speedy Low Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DEWALT stand, put everything into your vehicle, and head out to the job site without losing your position.
On Sale
On Sale
1 NEW DeWalt DWX724 Stand Drilled for Axle and Handle Kit
1 847 623-7029
Lead Time 1 week
Introducing the new Predrilled miter saw stand
1 NEW DeWalt DWX724 Stand Drilled for Axle, Kickstand and Handle Kit. Accessories not included.
On Sale
On Sale
1 NEW DeWalt DWX723 Stand Drilled for Axle and Handle Kit
1 847 623-7029
Lead Time 1 week
Introducing the new Predrilled miter saw stand
1 NEW DeWalt DWX723 Stand Drilled for Axle, Kickstand and Handle Kit. Accessories not included.
On Sale
On Sale
EZ Speedy Axle Kit
1 847 623-7029
Lead Time 1 week
Introducing the EZ Speedy Axle Kit.
This axle kit mounts directly onto your DeWalt DW723, DWX723, and DWX724 miter saw stand.
Note the DeWalt DW723 Axle Kit does not come with spacer!
Make sure that you check your model number.
Increase the mobility of your saw station.
- Leave your saw on the stand, drop the wheels to the ground, and then roll. No more lifting your saw around the job site or shop
- Save your back!
- For safe operation of Axle Kit, you must maintain proper tire air pressure.
- New Chrome Plating for lifetime finish
Comes with all necessary hardware to bolt the axle to the stand and tires to the axle.
Includes a template that you can tape to your saw stand to align the axle before drilling. See our Youtube Video by scrolling below.
If you order the Axle Kit with tires, we will Ship your Kit with tires .
On Sale
On Sale
EZ Speedy Kickstand Kit
1 847 623-7029
Lead Time 1 week
NOW WITH STANDARD TOOL LESS OPERATION!
EZ Speedy Kickstand KIT comes as pictured. Axle not included and is available in a separate listing below. Our kickstand mounts onto our EZ Speedy Axle Kit for the DeWalt DW723, DWX723, and DWX724 miter saw stands.
Allows the saw stand to be positioned vertically while the saw is still attached for a reduced footprint.
Rotates out of the way when not in use.
Comes with all necessary hardware to install the kickstand onto the axle. (3/16 Allen Wrench Needed to Install Cross Bar)
- New Chrome Plating for lifetime finish
On Sale
On Sale
EZ Speedy Handle Kit
1 847 623-7029
Lead Time 1 week
Upgrade your existing EZ Speedy Axle/Kickstand Kit with the familiar feel of our EZ Speedy Handle!
Introducing the EZ Speedy Handle Kit. Allows for greater control of your stand if you've already have our axle/kickstand kit installed. This Handle kit mounts directly onto the opposite end of your DeWalt DW723, DWX723, and DWX724 miter saw stand.
Note the DeWalt DW723 Handle Kit does not come with spacer!
Make sure that you check your model #
- Increase the mobility of your saw station.
- Leave your saw on the stand, drop the wheels to the ground, and then roll. No more lifting your saw around the job site or shop
- Save your back!
- Familiar, Comparable to operating a Hand Truck or Dolly
Comes with all necessary hardware to bolt the Handle to the stand.
Includes a template that you can tape to your saw stand to align the Handle before drilling. See our Youtube Video by scrolling below.
On Sale
On Sale
Miter Saw to DeWalt Stand - Spacer Mounting Kit
Only a few left!
1 847 623-7029
Lead time 1 week
Mount just about ANY BRAND miter saw to the DW7231 Mounting Brackets so that you can use DeWalt DWX723, DW723, DWX724 and DWX725B stand.
Fitment is for various models, but if your miter saw is not listed in the selection below, please contact us and we can see if we have something that will work!
On Sale
On Sale
EZ-Speedy Steel Cutting Chop Saw Mounting Plates Kit for the DeWALT DW872 or D28715 Saw
1 847 623-7029
NEW DEDIGN MACHINE FROM BILLIT 6061-T6
Stop cutting metal on the floor. This kit allows you to mount your saw onto the DeWALT Stand. This Adapter Plates is designed to mount a DeWalt DW872 or D28715 metal cutting saw to the DW7231 Quick Release mounting brackets allowing you to work off the DeWalt DWX723, DWX724, DW723 Heavy Duty Miter Saw Stand at a comfortable working height you are used to. This also allows wood and steel cutting to be performed in the same location if desired.
Don't have a DeWalt stand? Contact us to inquire about your specific saw stand. We also have the DeWALT Model number DWX723 and DWX724 available for purchase here on our webstore.