HERCULES 12" Model # HE78 EZ-Speedy Zero Clearance Table Insert
Purchase 2 or more lower shipping cost
Exact fit for the Hercules 12" Model # HE78
Made from High Density Polyethylene. Which makes it easy to make the initial cut and even more durable for daily commercial use.
- Increase product cutting support.
- Reduce chipping
- Reduce kickback
- Reduced blade binding cutting small parts.
- Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.
For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence.
HERCULES 12" CHOP SAW Model # HE78 EZ-Speedy Zero-Clearance Fence Left and Right
Purchase 2 or more product lower shipping cost
Exact fit for the HERCULES 12" Model # HE78
If you are looking to increase the safety and precision of your cuts then our Zero Clearance Fence is the perfect product for you. No more small pieces jamming into your standard fence and binding your blade.
- Increase product cutting support.
- Reduce chipping.
- Reduce kickback.
- Reduced blade binding cutting small parts.
- .Made from lightweight stable heat treated 6061-T6 Plate.
- Vinyl Protective Film Cover.
We also put a relief cut on the inside edges of the aluminum fence. This will allow you to change the angle of your saw while still being able to accurately hook your tape measure onto the fence edge. Enabling you to setup a miter cut as quickly and accurately as a 90-degree cut.
The two aluminum fence pieces come shipped with flat head bolts + flange nuts.
For greater accuracy, efficiency and safety, we recommend pairing our Zero Clearance Fence with our Zero Clearance Table Insert.
EZ Speedy Fence System 5' - DeWALT Low LEFT or RIGHT
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes one EZ Speedy Fence, one EZ Speedy Flip-Stop and one EZ Speedy Fence Table or two Roller Assemblies.
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
EZ Speedy Dual Clip
Lead Time 1 week
1 847 623-7029
We've re-invented the average clipboard! The EZ Speedy Dual Clip!
This clipboard design was born out of necessity to have a clipboard that fits into the t-track on our mobile miter saw base. We took it one step further and created a clipboard that has two different geometrically bent ends. One for inserting and one for hooking. The Dual Clip also has two clips so you can utilize both sides.
Hooks to anything and the opposite side allows you to insert into our EZ Speedy Fence System or any type of strut rail system. You can even set your tablet down on the dual clip. It can even work like a sturdy writing surface. Carry with you from jobsite to jobsite.
See our product video below!
EZ Speedy Fence - DeWalt 5'LEFT or RIGHT (NEW & IMPROVED)
Only a few left!
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
Lead Time (Made to order upon request)
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the DW723, DWX723, and DWX724 DeWalt Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- Tool-less Upgrade (EZ Speedy Quick Handles for the Strut Mount)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel Double T-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
Optional Additions:
- EZ-Speedy Flip-Stop
- Rollers
- Table
- COMING SOON!!!Crown Stop early 2022
- Coping Crown Clamp early 2022
- Vertical and Horizontal workpiece clamping for miter saws
EZ Speedy Fence - BOSCH T4B and GTA38005'LEFT or RIGHT (NEW & IMPROVED)
Only a few left!
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
Lead Time (Made to order upon request)
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the Bosch Gravity Rise T4B Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the Bosch stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel DoubleT-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
- EZ Speedy Quick Handles for Fence Mounts
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
- Table
EZ Speedy Fence - Milwaukee 5'LEFT or RIGHT (Pre-Order)
Due to low demand, the lead time on this product is significantly longer.
Exact Fit for the Milwaukee Stand Model # 48-08-0551
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Upgradable with Quick Handles for Tool Less Operation
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- Tool-less Upgrade (EZ Speedy Quick Handles for the Strut Mount)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel Double T-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
EZ Speedy Fence -For Makita Model # WST06 5'LEFT or RIGHT (NEW & IMPROVED)
Only a few left!
NEW SYSTEM - NEW FEATURES - NEW IMPROVEMENTS
Lead Time (Made to order upon request)
- Adjustable Roller Position
- Easier Elevation Adjustment
- Improved Installation Speed
- Built to Last. Made of 12-Gauge Steel, Welded Double T-Track, Zinc Plated to Resist Corrosion
- Couples to the Newest EZ Speedy Extension
- Only Fence System to Offer our Patented and Proven Micro-Adjustable Flip-Away Strut Stop
- Supports the Heaviest of Material, Even for Metal Working Applications
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for for the Makita Model # WST06 Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent pending EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DeWalt stand, put everything into your vehicle, and head out to the job site without losing your position.
Standard Equipment (As Pictured):
- Tool-less Upgrade (EZ Speedy Quick Handles for the Strut Mount)
- 5 FT Long, 1-5/8" x 1-5/8" Welded Steel Double T-Track
- EZ Speedy Coupler Mount Assemblies
- EZ Speedy Fence Mounts
Optional Additions:
- Micro-Adjustable Flip-Away Strut Stop
- Rollers
- Table
EZ Speedy Flip-Stop w/ Calibrated Dial
Purchase 2 or more save on shipping
847-623-7029
Made in USA
Lead time 1 week
Increase your productivity with the redesigned EZ Speedy Flip Stop! Engineered for those craftsmen who wish to take their material cutting to the next level of tolerance and accuracy. Each line on the dial is calibrated to adjust cuts +/- 0.0052". Featuring an adjustable aluminum quick handle, which can be positioned so that it doesn't interfere with anything while in use. Simply lift and reposition.
Product details:
- Can be assembled into a left or right side - flush with table, low, or high positioning.
- American-made design to exceed demands of commercial manufacturing
- Clear Zinc Plating finish for corrosion resistance
- Flip-Away action and quick-set clamping for speed
- Multi position black powder coat aluminum locking handle.
- Precise indexing for accuracy
- 1 line (1/12 of a turn) equates to 0.0052"
- Easy, repeatability with your cuts
- One full turn = 1/16"
Purchasing one means you will receive a quantity of one!
Buy multiple and save time!
Multiple Flip-Stops will save you time by not having to break setups. Set multiple stops to different dimensions you will be required to cut.
EZ Speedy Fence System 5LR - Bosch T4B and GTA38005' LEFT or RIGHT Low
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes one EZ Speedy Fence, one EZ Speedy Flip-Stop and one EZ Speedy Fence Table or two Roller Assemblies.
With 5 FT of material support, each EZ Speedy Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, chop saw, miter saw, radial arm saw, punch press, band saw.
Made for the Bosch T4B and GTA38005' Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent EZ Speedy Mounts.
The EZ Speedy Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the Bosch T4B and GTA38005' stand, put everything into your vehicle, and head out to the job site without losing your position.