We use our inventions and saw fences everyday to eliminate the headache of keeping +/- 0.005" tolerance on all manual machines. No DRO or CNC
We also invented the best Tubing Notcher in the world and sell the deepest and the cheapest Deep Cut Hole Saws
American Made Tools For
Carpenters, Woodworkers, and Metalworkers
Slides Into The DeWalt Saw Stand Track
|
Add Material Support To Your DeWalt Miter Saw
The all billet steel EZ Speedy Fence comes standard with two spinning rollers made for commercial use. Add more length and support to your fence with additional EZ Speedy Extensions $189.95
|
Utilize Our Patented Flip-Away Strut Stop
Take pencil lines out of your setup and confidently get +/- 0.005" tolerance within minutes. This is the easiest system to train new employees on.
|
|
|
EZ Speedy Zero Clearance Easily Set The Flip-Away Stop When doing miter cuts. A relief cut allows you to set aluminum fence so it just clears the blade when doing a miter cut. Instead of guessing you can hook your tape and measure out to the stop and accurately set your long or short dimension for your miter cut.
More Brands and Models Have Arrived
|
Plastic Inserts for DeWalt Saws
DeWalt 12" (DWS780, DWS782, DWS779, DHS780 & DHS790) Zero Clearance Table Insert
Purchase 2 or more lower shipping cost
Buy 3 and get 1 Free you save 25%
1 847 623-7029
Exact fit for the DeWalt Model # DWS779, DWS782, DWS780, DHS780 & DHS790
Made from High Density Polyethylene. Which makes it easy to make the initial cut and even more durable for daily commercial use.
- Machined out of solid Density Polyethylene Sheet
- Increase product cutting support.
- Reduce chipping
- Reduce kickback
- Reduced blade binding cutting small parts.
- Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.
For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence.
DeWalt 10" - 12" Miter Saw Zero Clearance Table Insert
Purchase 2 or more lower shipping cost
Buy 3 and get 1 Free you save 25%
Exact fit for DeWalt Miter Saw 10" -12" Model # DW703, DW704, DW705, DW705S, DW706, DW713, DW715, DW716, DWS713, DWS715, DWS716 and DHS716
Made from High Density Polyethylene . Which makes it easy to make the initial cut and even more durable for daily commercial use.
- Machined out of solid Density Polyethylene Sheet
- Increase product cutting support.
- Reduce chipping
- Reduce kickback
- Reduced blade binding cutting small parts.
- Quick measurement of desired cut. Simply hook your tape measure into the insert and easily get an initial setting with your stop.
For a higher level of accuracy, efficiency and safety, we recommend pairing our Zero Clearance Miter Saw Plastic Insert with our Zero Clearance Fence.
Product Catalog
EZ Speedy Axle Kit
1 847 623-7029
Lead Time 1 week
Introducing the EZ Speedy Axle Kit.
This axle kit mounts directly onto your DeWalt DW723, DWX723, and DWX724 miter saw stand.
Note the DeWalt DW723 Axle Kit does not come with spacer!
Make sure that you check your model number.
Increase the mobility of your saw station.
- Leave your saw on the stand, drop the wheels to the ground, and then roll. No more lifting your saw around the job site or shop
- Save your back!
- For safe operation of Axle Kit, you must maintain proper tire air pressure.
- New Chrome Plating for lifetime finish
Comes with all necessary hardware to bolt the axle to the stand and tires to the axle.
Includes a template that you can tape to your saw stand to align the axle before drilling. See our Youtube Video by scrolling below.
If you order the Axle Kit with tires, we will Ship your Kit with tires .
EZ-Speedy T-Track: 13/16" x 1-5/8" x 60"
The EZ-Speedy T-track can be resets flush or surface mount for your custom miter saw and table saw sled/jig set up. The EZ-Speedy T-Track can be used for precision drilling on drill press and milling machines. Buy the single T-Track to make a custom set up on one of your machines using the EZ Speedy Flip Stop
Stranded length T-Track is 60". Call or email for Custom length T-Track for you system.
Average Lead Time 1 week
Mending Plate
847-623-7029
Lead Time 1 week
Buy a single Mending Plate assembly to build a custom fence setup using our Strut Rails and Rollers. This is the same Mending Plate assembly that comes with the EZ Speedy Extension.
EZ-SPEEDY 1/2" 3 Jaw Chuck Hole Saw Arbor
Use our adapter to mount our Bi-Metal Deep Cut Hole Saws to any machine. Perfect for use with milling machines, and drill presses.
Use with our Deep Cut Bi-Metal Hole Saws
Arbor thread pitch is 3/4 - 16
EZ-Speedy Support Stand
1 847 623-7029
Even though this Support Stand was engineered for the EZ Speedy Fence this Support Stand stands on its own.
This stand has one 1/2-13 threaded through hole mounting point at the top making it easy to bolt up or down to it
The hex mount slides right off when you loosen the 1/2-13 inch bolt on the side or upgrade to the T-Knob for $6. Tighten it up to maintain rigidness.
Adjusting the Height is done by rotating the threaded 7/8-9 adjustment screw in or out to set desired height.
Height Range is 32-1/4" to 39-1/2"
This stand has claw feet at its base to handle rough surfaces easily.
Average Lead Time 1 week
Table Saw Fence Micro-Adjuster
Purchase 2 or more save on shipping
Made in the USA
Lead time 1 week
BUY 2 AND GET THE SECOND 1 HALF OFF
Dial out your Fuzz!!!
Move the adjustment point one flat and you can move your fence 0.010"
Clamp opening = 3/4" thru 2"
This Micro-Adjuster is specifically engineered for commercial Biesemeyer-style T-square table saw fences, but it can be used for router tables and other adjusting jobs. This added accessory allows operators to dial in their cutting coordinate, allowing for precise adjustments. Though other designs and other products are available, we haven't encountered another adjuster as practical as ours which can still stand up to the rigors of an industrial/commercial environment, as well as afford an operator such consistently accurate control.
Buy multiple and time!
Multiple Micro-Adjuster will save you time by not having to break setups
EZ Speedy New Low Support Fence System 5' - DEWALT LEFT or RIGHT
1 847 623-7029
Made in USA
Lead Time (Made to order upon request)
Includes only (1) Side
What you get is (1) EZ Speedy Flip-Stop , (1) EZ Speedy T-Track, (1) EZ-Speedy Table (2) EZ Speedy Low Coupler Mount Assemblies and (1) Pair of EZ Speedy Fence Mount with Multi position black aluminum locking handles.
With 5 FT of material support, each EZ Speedy Low Fence can be assembled in either LEFT or RIGHT configuration as desired. Can be used for a variety of applications: Drill press, milling machine, cold saw, miter saw, radial arm saw, punch press and band saw.
This support fence system and flip stop is for the DW723, DWX723, and DWX724 DEWALT Miter Saw Stand, our EZ Speedy Fence slides right into the T-track and quickly locks down to the stand with our patent EZ Speedy Mounts.
The EZ Speedy Low Fence has multiple points of adjustment to set the height, depth, lateral position, and angle of the EZ Speedy Fence.
Once the points of adjustment are set to your saw table, they are locked down so you can easily remove the EZ Speedy Fence from the DEWALT stand, put everything into your vehicle, and head out to the job site without losing your position.